White Meter Heating runs at Off Peak times. It is preset to activate between 11pm and Midnight, and de-activates at approximately 7 / 8 am.

1. Switch on fuse switch in kitchen or at boiler (the light will not come on until it is activated at off-peak time). Leave switched on at all times.

2. Switch on storage heaters individually at fuse points on wall.

3. Each storage heater will have two controls: Input and Output or Damper control.
   Input – amount of heat you want to store. Output – amount of heat you want to release.
   
   The heat is stored in the heater and can be released quickly or slowly. E.g. If output is left at setting 3 overnight, the room should be warm in the morning. We would suggest that it is left at this setting during the day when you are out. In the evening switch up to a higher setting to release more heat when you are in the property. You should remember to put the setting back to 3 before going to bed.

4. If you wish any extra hot water, then switch the Boost switch on the panel, usually located in the kitchen.